turned up at a job tonight on a heatline s30 compact , was told a couple of other guys have been but couldnt fix it , anyway got to my lock up which looks like septoes yard and managed to dig a board out , anyway arived and boiler is showing flue switch fault but tested ok ...put new board on (well second hand) and the
boiler goes through ignition sequennce but wont fire ,,AT ALL,,sparks seem strong , getting gas in to the sellonoind but f/a out to the burners, checked polarity etc and connections but then he said id hadnt worked since december !!! wtf.. i know my board could be faulty ,, any other ideas .. its also had a bad leak on it ,, will be back tomorrow and ive done the manuals but not very helpful for elecrtics,,any ideas would be wellcome , set the pots to the same as old board but this does my head when people have already pulled wires etc etc and i ve got a crappy set of mi;s photocopied and you cant see nothin ...BUT ITS A MATE AS WEll... cheers fellas ..its just locking out after 3 attemps and showing gas fault .... geting no power at sellonid so i think the bar is buggered !!! so any ideas and cheap boards.....cheeers mark😛😛
boiler goes through ignition sequennce but wont fire ,,AT ALL,,sparks seem strong , getting gas in to the sellonoind but f/a out to the burners, checked polarity etc and connections but then he said id hadnt worked since december !!! wtf.. i know my board could be faulty ,, any other ideas .. its also had a bad leak on it ,, will be back tomorrow and ive done the manuals but not very helpful for elecrtics,,any ideas would be wellcome , set the pots to the same as old board but this does my head when people have already pulled wires etc etc and i ve got a crappy set of mi;s photocopied and you cant see nothin ...BUT ITS A MATE AS WEll... cheers fellas ..its just locking out after 3 attemps and showing gas fault .... geting no power at sellonid so i think the bar is buggered !!! so any ideas and cheap boards.....cheeers mark😛😛
