Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

View the thread, titled "Hot water OK, CH not working!" which is posted in Central Heating Forum on UK Plumbers Forums.

A

Andy-H

I have a Potterton Promax combi 28HE Plus A.
Hot water fine, heating not working. If I remove the diverter motor and press the valve manually, the radiators heat up!
I have replaced the motor (diverter valve) and the PCB. The thermostat is a Danfoss wireless RET B-RF conected to a Danfoss RX 1. Which seems to be working correctly.
(i.e. setting therm. Lights RX1). But still no CH. !!!!
Can anyone please help??
 
Not sure why you’d replace the pcb without due cause. Pressing the pin down on the diverter valve give some you CH and you have replaced the motor, that leaves the valve itself - have a look at replacing this (some are cartridge type).
 

Official Sponsors of Plumbers Talk

Reply to the thread, titled "Hot water OK, CH not working!" which is posted in Central Heating Forum on Plumbers Forums.

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.

Thread Information

Title
Hot water OK, CH not working!
Prefix
N/A
Forum
Central Heating Forum
Start date
Last reply date
Replies
1

Thread statistics

Created
Andy-H,
Last reply from
Deleted member 120897,
Replies
1
Views
932

Weekly or Monthly Email Digest

Back
Top