How do I remove the front cover from a Vent Axia extractor fan

[talktalk]

The model number is not shown, but I have attached an image of the model. There are two small flexible plastic tabs underneath the fan. I have tried squeezing them together. They click but they don't release the front cover. I have tried pulling the lower edge away from the fan but am reluctant to try harder and cause damage.

 

[Chuck]

I'm not sure, but I think that you probably have the 'Lo-Carbon SOLO Plus SELV' model. If so, according to the installation instructions:

https://asset.eezybridge.com/nc/ba7b9546-29dd-40c4-87a7-885627281b87/VA_LC_Solo_Plus_SELV_FW.pdf

"Firstly remove the front cover by carefully pulling each corner of the front panel until it is
free to be removed from the inner grille (Fig 1)"

 

[talktalk]

Thank you, it does look like I have the Lo-Carbon SOLO Plus SELV model.