How to lift or uninstall an all-in-one freestanding tub?

[jwicks64]

We need to take our all-in-one freestanding tub to replace the floor tiles.

(1700x800 Ava slimline freestanding bath tub large)

But I can't find out or figure out how to remove it.
There is no access below or to the side of the tub.

How is this done?

Thanks

 

[exedon2]

If it won't move at moment almost certainly held down by silicone needs to be cut though with a sharp blade , old handsaw may be useful as floor is being replaced.
Bath will be on some sort of flexi connections i lift bath onto short lengths of 3x2 or similar to get at connections then struggle!
Welcome to our world.

 

[Ben-gee]

Exedon2, do you use a flexible waste connection? I have to fit a happy d2 fully shrouded bath and not looking forward to it!

 

[exedon2]

Been lucky last few ive done been able to arrange waste so trap could be lifted slightly so with bath lifted on 3x2 timber arm underneath and hit and hope.
Truly dreadful things.