Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Status
Not open for further replies.
Hi folks,

i'm due to install a new system in a 5 bed home..

I'm a little baffled on the boiler as it has more pipes then the usual. It has 2 x 28mm pipes and 2 x 22 m pipes for Hot water & Heating.
The system in the house is the traditional vented system, but what i don't know at this moment if it's the 1 or 2 pipe heating system, due to not being able to lift any boards up.

Can anyone shed some light on this boiler, so far i've read its around 20yrs+ of age and it's balanced flue..
 
If it is, it warmed up the cylinder really fast. Mind you when i turned the heating on, the pump didn't run, but one of the flow pipes ( i take it) warmed up quite rapidly.

weird scenario..
 
Last edited:
Status
Not open for further replies.

Official Sponsors of Plumbers Talk

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.

Weekly or Monthly Email Digest

Back
Top