Ideal logic

[P4ULT]

Evening chchaps are there any known faults on a ideal logic that will cause it to lock out. Boiler says check other gas appliances, I haven't looked at it yet. That's all the info I have. I'm not really familiar with them.mwas serviced recently by and all was well, by another chap in work.

 

[zeebeedee]

What's the fault code?

 

[P4ULT]

No code as far as I know, resets each time. Has only happened a couple of times.

 

[Rickster123]

The only time I've seen that happen the customer was out of gas on a pre pay meter.

 

[Ermintrude]

Disconnect conny any back pressure and she's on strike.

 

[Ermintrude]

Put into installer mode to see lock out history.

Both DHW and ch to min hold on reset and you will get last 10 faults.

I bet conny like a lady of the nights draws or it's blocked.

 

[P4ULT]

Condensate trap as cleaned, any rules when putting it back in.

 

[Killy Bing]

Condensate trap as cleaned, any rules when putting it back in.

Check where it terminates.
could be blocked there

 

[smtplumbing]

take the trap out then check. remove the black hose check thatand check were it exits eg into a trap it can block soo easily

 

[thomas donovan]

has anyone seen these condensate traps fill with an almost sludgy type substance??

 

[thomas donovan]

and gurgle when trying to operate

 

[IDCHAPPY]

has anyone seen these condensate traps fill with an almost sludgy type substance??

Most condensate traps fill with that sludge, especially broags, need thoroughly cleaned out if they get to that stage 🙂

 

[thomas donovan]

this happened 5 months after i installed it!

 

[Ermintrude]

Brick dust and alu oxide . U costal? That makes it worse.