2 2021bela Dec 6, 2021 #1 I have an Ikea sink with trap however the waste fkexi hose does not connect to the 1 1/2 white waste pipe. Is there any fitting I can get to connect the two together or should I use normal traps and bends from the holes in the sink.
I have an Ikea sink with trap however the waste fkexi hose does not connect to the 1 1/2 white waste pipe. Is there any fitting I can get to connect the two together or should I use normal traps and bends from the holes in the sink.
S steadyon Esteemed Dec 6, 2021 #2 Have a look at at McAlpine T28-ISO. Measure the grey flexible waste plain end, and if 38 mm diameter that should do the job. Upvote 0 Downvote
Have a look at at McAlpine T28-ISO. Measure the grey flexible waste plain end, and if 38 mm diameter that should do the job.
2 2021bela Dec 8, 2021 #3 Is it possible to remove all this Ikea waste under the sink and use all mcalipne fittings, traps etc.. Upvote 0 Downvote
Is it possible to remove all this Ikea waste under the sink and use all mcalipne fittings, traps etc..
2 2021bela Dec 8, 2021 #4 Is it possible to remove all this Ikea waste under the sink and use all mcalipne fittings, traps etc.. Upvote 0 Downvote
Is it possible to remove all this Ikea waste under the sink and use all mcalipne fittings, traps etc..