Hi, I’m looking for a heating engineer/plumber who has experience with both the wiring and pipe work side of a central heating system.
It’s for a large house with two main boilers and an annex served by a combi boiler. The house was extended in 2011 and two ‘new’ UFH manifolds serving the extended bit of the main house were (inexplicably) served by the combi boiler.
After some issues with the annex heating, the wiring between the UFH manifolds and the programmer adjacent to the combi were disconnected.
I worked out the above cause, but I need someone with the expertise to put it all back together again.
The whole system also needs flushing and rebalancing etc.
The house is in Oxshott, Surrey (just inside the M25). Please let me know if you can help.
Thanks
Mark
It’s for a large house with two main boilers and an annex served by a combi boiler. The house was extended in 2011 and two ‘new’ UFH manifolds serving the extended bit of the main house were (inexplicably) served by the combi boiler.
After some issues with the annex heating, the wiring between the UFH manifolds and the programmer adjacent to the combi were disconnected.
I worked out the above cause, but I need someone with the expertise to put it all back together again.
The whole system also needs flushing and rebalancing etc.
The house is in Oxshott, Surrey (just inside the M25). Please let me know if you can help.
Thanks
Mark
