Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

View the thread, titled "Mixer Shower Problem" which is posted in Showers and Wetrooms Advice on UK Plumbers Forums.

E

erp

I recently bought a property with a relatively new mixer shower. I've retained this and simply changed the exposed pipe and rose to concealed pipes behind the wall and a fixed arm. Now that i am in the property and actually using the shower i am finding that it starts really well, great pressure and temperature but after about 5 minutes the pressure drops to a dribble and comes back sporadically. I noticed this happened this morning when i tried to cool the temperature down a little. (although, i did do this after about 5 minutes so it may just have been coincidence)

Any ideas what the problem is? I asked a plumber yesterday but he wasn't sure. Any help would be greatly appreciated.
 
We've only tried to use the shower 3 times, and it's happened each time.

When we ran the pipes and connected it to the fixed arm we tested it to ensure it was working before enclosing it with pboard and tiles. It ran fine but we didn't leave it running for a decent amount of time. It's really frustrating because it works perfectly at the start then eventually dies out.
 
if the shower works ok for 5 mins then it would seem to be fine are you sure there are no problems with the combi like the 3 way valve.
 

Official Sponsors of Plumbers Talk

Reply to the thread, titled "Mixer Shower Problem" which is posted in Showers and Wetrooms Advice on Plumbers Forums.

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.

Weekly or Monthly Email Digest

Back
Top