pricing up for little job

[SimonG]

14 turns and paste, funny but I never use 13 turns 🙂

 

[Rickster123]

Nooooooooo not this again! Stuck in a p.t.f.e time warp!

 

[kay-jay]

always 13 turns on rad tails.

 

[kay-jay]

Wow a 10 page thread about thread tape on a compression fitting, dunno what's worse this thread or me reading all of it, LOL, a simple answer to all is, each to their own. Can I start a thread, What do you put on your radiator tails?? PTFE, PTFE & Paste?? How many wraps of PTFE??

yes you can start a thread. just dont wrap tape round it....

 

[dancinplumba]

Why not forget the tape an paste and use self sealing tails ?

 

[Rickster123]

Why not forget the tape an paste and use self sealing tails ?

Theres always one that has to confuse things!

 

[Kyle87]

Just become a tiler and shut up the lot of you!!!!!!!!!


🙂

 

[helpsy]

12 turns of PTFE on rad tails

 

[helpsy]

U wont go back to anything else keefy! That stuff is gold dust! Ive even used it a few times on traps that havent sealed and wouldnt seal dry for some reason (not McAlpine traps)

Isn't that oil based that paste?

 

[Spanner2k7]

yes you can start a thread. just dont wrap tape round it....

so you go with liquid ptfe then???? LOL 🙂

 

[Keefy]

I know this topic title doesn't have it but there are only 16 threads (no pun intended) with 'PTFE' in the title here on the forums, was expecting hundreds. Probably thousands in the GSR private forum.

 

[Rickster123]

I know this topic title doesn't have it but there are only 16 threads (no pun intended) with 'PTFE' in the title here on the forums, was expecting hundreds. Probably thousands in the GSR private forum.

Croppie has shut down thousands of those threads in the last few months!

 

[Keefy]

^ From Pegler Yorkshire

 

[Avatar]

View attachment 13354
^ From Pegler Yorkshire

Hmm doesn't say anything about any kind of paste needed here - not even crab paste!

 

[Phil_Plumb]

went and done it today all done no paste tho:6:
But its beer money for the evening :8:

OMG supperplumb do you have shares with a wellknown PTFE manufacturer? whats wrong with some jetblue on the inside of the fitting then inserting into gap and nipping up the nuts?

overkill on PTFE and you only use 10-12 turns on rad tails!

tbh its fortunate its in the loft as i wont be able to see this from my front room if i was the custard.

you can learn a lesson from this i hope!

wow first time ive seen this thread and pics, jeez!

 

[Plum Bob 66]

Just out if interest whilst the op is now well versed on the pros and cons of paste and ptfe, did he get an answer to his original question, if so I think it's been lost somewhere ;-)

 

[supper plumb]

????? my head hurts????

 

[Keefy]

????? my head hurts????

Wrap a bandage round it, if you don't have a bandage...

 

[stevetheplumber]

dont forget to sit in the loft for 40 mins tapping on a pipe every few minutes

 

[Keefy]

dont forget to sit in the loft for 40 mins tapping on a pipe every few minutes

A wrap a minute?

One wrap...

Two wrap...

Three wrap...

............................. another roll...

 

[Gas]

If my maths is right, college courses should be touching on correct jointing methods by now for the first years.

So my question to SupperPlumb, do you now look back at that picture and cringe, just a little? :teeth_smile:

Be honest...

 

[Dan]

Don't mind me while I reply to a few of the threads. We need the new thread pages to be picked up correctly. If this thread isn't current, just visit the plumbing forum and post your own new thread or checkout the other existing threads.