Narrowly missed out on getting a job to refurbish some pub toilets - got beaten on price by a small margin. Anyway 6 months on and I happened to be at the pub and thought I'd go and have a look. The old wall was supposed to be covered in multipanel with the pipework behind, and basins to be wall mounted with mixer taps.
When I saw it I had to chuckle - instead of proper multipanel, the installers had used that cheap UPVC stuff you use on caravans. The mitred corners didn't meet up in a lot of places. It was split at the bottom where someon had booted the wall and the basins were fitted with unsuitable mixer taps - cold water spews over the top of the basin so the floor is permanently wet and because of the unbalanced pressures, the water is cold. They had charged almost as much as I was going to (but I had priced for a proper commercial grade job with proper materials) and my guess is the pub is going to want it doing again within the next couple of years.
When I saw it I had to chuckle - instead of proper multipanel, the installers had used that cheap UPVC stuff you use on caravans. The mitred corners didn't meet up in a lot of places. It was split at the bottom where someon had booted the wall and the basins were fitted with unsuitable mixer taps - cold water spews over the top of the basin so the floor is permanently wet and because of the unbalanced pressures, the water is cold. They had charged almost as much as I was going to (but I had priced for a proper commercial grade job with proper materials) and my guess is the pub is going to want it doing again within the next couple of years.