pump locations for solid fuel back boiler & oil boiler

[mgm2009]

I have a question about domestic plumbng.when I tie in oil and solid fuel do i need a pump on both oil and soild fuel boilers and do i need NRVs on flow and return for the oil boiler.

Thanks in advance

 

[Bartdude]

It's not as simple as that I'm afraid. There are a few methods of doing this,check out the links below. A thermal store is widely accepted as the best method but whatever system you use it's VERY IMPORTANT that it's done correctly by someone who understands the system. It can be very dangerous when installed badly.

[DLMURL="http://www.dunsleyheat.co.uk/linkupsys.htm"]dunsleyheat uk manufacturers of multifuel stoves, range cookers, boilers...[/DLMURL]

Heating Innovations homepage

 

[ecowarm]

There is a new solution to this and details can be found here Watawama | Home I have not used one but have emailed for prices and will give it a try

 

[quality]

Ive used the H2 panel on a few jobs and have been quite happy. Have you got a job lined up for your new find eco

 

[ecowarm]

Possibly at home, depends on price, I'll see if I can get one at cost 😉 😉

 

[quality]

Please keep us informed