I have removed a radiator and wish to replace using existing pipework and valves. The old radiator itself was 1290mm in width with a total width tail to tail of 1330mm. The pipe to pipe measurement is 1350mm. The height of the old radiator was 430mm however I could go to 500mm with the new one. Guess I’ll need a 1200mm radiator however would be grateful for any advice regarding tails and adaptors (if required) measurements. Many thanks in anticipation.
Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
Radiator replacement - measurement clarification.
- Thread starter SteveK
- Start date
-
- Tags
- radiator replacement
View the thread, titled "Radiator replacement - measurement clarification." which is posted in Central Heating Forum on UK Plumbers Forums.
Official Sponsors of Plumbers Talk
Reply to the thread, titled "Radiator replacement - measurement clarification." which is posted in Central Heating Forum on Plumbers Forums.
We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.
