Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

View the thread, titled "Replacing a Keston C36 - The worlds worst boiler?" which is posted in Boiler Advice Forum on UK Plumbers Forums.

Hi Guys,

I am the miserable owner of a Keston C36 boiler. It has had EVERYTHING on it replaced.

My questions is, what do I replace it with and can it be done without replacing the entire flue. The dual flue is at least 10m long and has a couple of 45 degree turns in it. Am I going to need scaffolding on the outside of the property if a new one is to be installed, will I need to rip out half of my ceiling to put in inspection shafts?

I had a quote a few years ago from a company who were going to put in an Ideal Logic C30 and they were asking for over £6K. I have just tried to keep the boiler going since then and have still not found a viable option for replacing it. I am based in east london.

Any advice would be much appreciated.

Sean
 
Hello Sean,

Yes, the flue would nee to be replaced entirely, even if you were to replace with another Keston. If the flue is concealed, the inspection hatches are required. Is there an option to relocate to boiler?
 
Hello Sean,

Yes, the flue would nee to be replaced entirely, even if you were to replace with another Keston. If the flue is concealed, the inspection hatches are required. Is there an option to relocate to boiler?
Hi Chris,

Thanks for the reply. It's not possible to relocate the boiler. I don't know the regulations well enough but I can see about half way down the flue from the current inspection shaft. A second or third one is what I'm probably going to need if a new flue is going in. My management company are utter bastards and are probably going to make it very expensive to get the permission to put scaffolding up on the outside (for sorting out the exit of the flue). What boilers should I be looking at for this sort of job?

Sean
 
Any combi boiler you want really, providing the gas pipe size is correct and you can get the flue sorted. Probably best engaging with a local engineer and having a chat with them as they’ll be able to best advise you.
 
Hi Chris,

Are there any specialists in east london who will know exactly my predicament? Someone who has ripped out Kestons previously and knows the situation? It's going to take a unique skillset to solve this conundrum!

Best

Sean
 

Official Sponsors of Plumbers Talk

Reply to the thread, titled "Replacing a Keston C36 - The worlds worst boiler?" which is posted in Boiler Advice Forum on Plumbers Forums.

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.

Thread starter

Joined
Location
Leyton, London
Member Type
DIY or Homeowner

Thread Information

Title
Replacing a Keston C36 - The worlds worst boiler?
Prefix
N/A
Forum
Boiler Advice Forum
Start date
Last reply date
Replies
4

Thread Tags

Thread statistics

Weekly or Monthly Email Digest

Back
Top