Replacing Newteam NT911 Mixer Shower

[malic]

Hi

Above 10 year old shower mixer has died leaving a double problem. It required pipework at 96mm AND with Hot on the right.

Can anyone suggest a replacement either as a complete new unit with similar setup or an economic way to overcome both problems. It can be thermo or not, doesn't matter. System is sealed.

BTW, I think it is a stud, rather than solid, wall but is, of course, tiled.

Can see why much of Newteam was binned!

Thanks if you can

Mal

 

[CXR100]

cant you put elbows from the pipe up the wall and offset one pipe? and do it in chrome or something? i know its gona be ugly, have you any pics?

 

[malic]

cant you put elbows from the pipe up the wall and offset one pipe? and do it in chrome or something? i know its gona be ugly, have you any pics?

Extreme option but, as you say, ugly. Guess I'm hoping for an obscure maker who still carries such daft products or an economic way to at least switch hot/cold. Mira have some but at the £290 end of the scale. Afraid no pics to hand but is a plastic single lever with up/down and twist. Housing covers pipework etc which works as it's only 96mm