Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

View the thread, titled "Request for DHW does not fire the boiler -" which is posted in Boiler Advice Forum on UK Plumbers Forums.

Status
Not open for further replies.
Hi,
I have a Ravenheat 100. CH works fine but when i turn on the hot tap the water runs cold for a very very long time before it heats up. It will also turn itself on and off again. It seems to be worse when the CH is turned off and better when the temp is turned up high.


The diverter valve is working fine and the flow control switch is aslo working. I have ordered a themistor sensor to replace the current one. After that I am not sure - any ideas.
 
firstly how have you checked that divertor and flow switch are operating correctly and secondly are you gas safe registered?
 
Hi not wanting to seem impertinent considering you have posted me a reply but the question you pose is actually in the body of my question. However i appreciate your taking the time to reply thank you.

And no I am not gas certified.
 
Status
Not open for further replies.

Official Sponsors of Plumbers Talk

Reply to the thread, titled "Request for DHW does not fire the boiler -" which is posted in Boiler Advice Forum on Plumbers Forums.

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.

Weekly or Monthly Email Digest

Back
Top