Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

View the thread, titled "S-traps self Syphoning" which is posted in UK Plumbers Forums on UK Plumbers Forums.

Matt0029

Gas Engineer
I watched a video and it went in about S-traps self spyhoning after discharge and said they were band in the USA. This isn't the case in the UK?
 
Not that I am aware. I think as long as you test that it works when installed and there remains a minimum of 25mm trap seal then you're okay.

However, if you look at ADH, it does show all basins discharging horizontally or at a slight angle which implies that that is how it should ideally be, and there is some kind of standard shown in my level 3 book which states that the amount of vertical section on a basin waste should be a maximum of... nil. In practice, if your only choice is to discharge vertically because your basin and soil stack are on different walls, you would have to have a vertical drop. I don't really see that a P-trap and bend adjacent or an S-trap straight into a vertical section are going to be any different.
 

Official Sponsors of Plumbers Talk

Reply to the thread, titled "S-traps self Syphoning" which is posted in UK Plumbers Forums on Plumbers Forums.

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.

Thread starter

Matt0029

Gas Engineer
Joined
Location
leeds
Member Type
Heating Engineer (Has GSR)

Thread Information

Title
S-traps self Syphoning
Prefix
N/A
Forum
UK Plumbers Forums
Start date
Last reply date
Replies
1
Unsolved
--

Thread Tags

Tags Tags
None

Thread statistics

Created
Matt0029,
Last reply from
Ric2013,
Replies
1
Views
453

Weekly or Monthly Email Digest

Back
Top