Hello, I have had this macerating toilet for several years and am now on the second pump inside it. Today water started spewing out from the tank lid where the pump is located. It seems as though the lid came loose and I couldn't re-seat it in place without jamming something between the water tank and the lid. It stopped leaking (I think) but this is obviously a temporary solution. Is this something anyone else experienced?
Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
Might be leaking and dripping down the back now. Most have clip in lugs to hold the lid down to the tank with a rubber seal to hold water back.
Without seeing it for myself unless you can post pictures all I can suggest is, IF the lugs are not broken, is to use a mallet but that may not work if the seal under the lid is not located as it should be.
Without seeing it for myself unless you can post pictures all I can suggest is, IF the lugs are not broken, is to use a mallet but that may not work if the seal under the lid is not located as it should be.
Official Sponsors of Plumbers Talk
Similar plumbing topics
- Question
- Question
- Question
- Question
- Question
We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.
