shower help

[dom brennan]

hi I've just fitted a mira minilite thermostatic shower and its only getting lukewarm I've had a look at the instructions and you can adjust it i was just wondering if this is the screw to adjust it or is it something different thanks dom

 

[AJL Plumbing]

Remove that screw at the front as pictured, put Allan key through screw hole and adjust temp, think it's anti clockwise for hot and clockwise cold

 

[Plumbstar Tom]

Check your supplies too and filters are clear. It will need relatively balanced pressures from hot and cold

 

[gassafe]

The instructions are normally pretty good on mira stuff! Have a read & it should all be okay as longs the hot supply is adequate!

 

[dom brennan]

I've sorted it now thanks guys 🙂