shower problems

[jackyp1234]

right, cust wants a new mixer shower fitting to her low pressure system , cold from tank hot from cylinder however she's wanting a combi fitting in 18 months, so anyone got any advice on how to go about this? my only idea is to buy a cheap mixer shower with 150mm enters of ebay to tie them over 18 months until they get the new system fitted, has anybody got any other thoughts on how to go about this? thanks

 

[Simon F]

tool station do a thermostatic bar mixer for £38 that covers a range I think of 0.1 - 5bar
if you fit a shower that covers such a range it will work for both systems.

 

[jackyp1234]

i have googled that shower thanks simon, doesnt say what the centers are on the tool station site though? hmmm any ideas?

 

[Simon F]

standard 150mm centres

 

[SimonJohns]

Mira excel

Tbh. 99% of showers are 6" (150mm) centres

The mira excel is just my shower of choice

You can get them as low as 250 if you shop around. I think about 330 if you don't

 

[jackyp1234]

your boths stars! cust is going to be over the moon! thanks a million

 

[spanner]

Most certain 150mm centres, weather a thermostastic or single manual mixer valve.