shower pump to bathrom

[feltham]

would using a shower pump for a whole bathroom be ok .i fitted a bathroom and the hws is very bad. the pump is already there to be used on a shower. i just wanted to know if any one could help?
i also think there is a parcial block on the cold feed maybe to the hws vessel.
hope you can shed some light
ta

 

[Plumbstar Tom]

shower pump is for a shower only

Put it on taps will burn it out as one side will be pumping at a time whilst the other spins round with no water and over heats

 

[Puddle]

There are system pumps now ,that can pump taps separately thus all bathroom but the one you have fitted will probably not be one of them
First of all you are going to have to get proper supplies and get rid of any restrictions or blockages