O
oap67
Hello all.
I have a 300l solar hot water cylinder, with 2 coils, one is used for solar, 1.5 bar, the other oil fired for the back up in the grey days , thats at 1.5bar,I would like to incorparate a wood fired stove with back boiler in the system, It is a viterous lined steel tank , I will properly cause too much damage if drill it to get another coil in. I could get a coil in through the immertion heater Plate.
As we all know you cannot have a back boiler in a fire with no open vent.
So ideas please.
Richard
I have a 300l solar hot water cylinder, with 2 coils, one is used for solar, 1.5 bar, the other oil fired for the back up in the grey days , thats at 1.5bar,I would like to incorparate a wood fired stove with back boiler in the system, It is a viterous lined steel tank , I will properly cause too much damage if drill it to get another coil in. I could get a coil in through the immertion heater Plate.
As we all know you cannot have a back boiler in a fire with no open vent.
So ideas please.
Richard
