Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

View the thread, titled "swaping a danfoss 2 port motorised valve to be replaced with a honey well" which is posted in UK Plumbers Forums on UK Plumbers Forums.

Status
Not open for further replies.

Inverness

Plumbers Arms member
Plumber
Gas Engineer
Changing over a danfoss 2port motorised valve for a Honeywell 2 port valve. The problem is the Honeywell has 5 wires but the danfoss has only four wires. It is a danfoss control box.
Can someone please give advice for correct position for wires.
cheers
 
What size valve is it

lame beat me to it, 28mm valve has a white wire which needs electrically isolating. I.e. Tape it up
 
Last edited:
Honeywell will be a 28mm 2 port motorised valve. Are you saying the white wire put tape over the end and leave it in the wiring box?
 
It's not needed on An S plan which is probably what you are doing
 
I was going to replace like for like but Honeywell are far better and are less chances of sticking.
It is a s plan.
 
I don't tape them up but make it electrically safe in a connector block.

The white wire in 28mm Honeywell is live when the valve is shut.

The micro switch is a single pole double throw - the grey & white make when valve is shut & grey & orange make when it is open.
 
The white is used on a C plan as Chris says white energises when the valve is shut, never done a C plan or ever come across one either.
But yes make safe
 
. I'll use a connector block on the White wire and put the rest of the colour wires where the danfoss wires came out?
 
Thank you all. The Honeywell 2 port valve 22mm has 5 wires are they all the same wires as a danfoss motorised valve but the only diffrence is the Honeywell has a earth wire?
 
Normally on these things Heads that have a metal case are earthed, ones that have a plastic case are not.
 
Status
Not open for further replies.

Official Sponsors of Plumbers Talk

Reply to the thread, titled "swaping a danfoss 2 port motorised valve to be replaced with a honey well" which is posted in UK Plumbers Forums on Plumbers Forums.

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.

Weekly or Monthly Email Digest

Back
Top