Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

taps

View the thread, titled "taps" which is posted in UK Plumbers Forums on UK Plumbers Forums.

Status
Not open for further replies.
T

Tonto123

Got a set of kitchen taps... it says minimum operating pressure 1bar... the mains should be ok... but the hot im not sure.. the hot water cylinder is upstairs.. would it need to be pumped to get 1 bar for the hot
 
yes, these taps are for unvented or combi's. you will have poor hot flow.
next time look for .2bar.min
 
Status
Not open for further replies.

Official Sponsors of Plumbers Talk

Reply to the thread, titled "taps" which is posted in UK Plumbers Forums on Electricians Forums.

Similar plumbing topics

S
Advice needed for a mixer Spray for kitchen ?
Replies
2
Views
731
Lou
Lou
D
  • Question Question
DHW supply from Vaillant turbomax 828e
Replies
4
Views
485
John.g
J
C
  • Question Question
Best place to source low pressure bath filler taps
Replies
12
Views
1K
Coddey
C
L
  • Question Question
Mains supply to mixer tap is pushing cold water to hot water pipe
Replies
4
Views
1K
LordWest
L
nashant
  • Question Question
Vibration when first opening hot tap after u/v cylinder heating cycle
2
Replies
27
Views
3K
nashant
nashant

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.

Featured Content

Weekly or Monthly Email Digest

Receive a daily, weekly, or monthly email containing a digest of new and recently updated threads.
Back
Top