L
Lance1968
Hi
the diverter valve between CH and HW appears to be playing up as the CH doesn't always fire up after HW has been used. Can anyone tell me how quickly the diverter should move please. When the HW is on it moves quickly with the pin moving out and pushing the microswitch(s) open. When it is switched off is moves back very slowly (a minute or more) before the microswitch connects again and the boiler fires up again.
I'm not sure if this is normal operation and if not whether it is the valve that is at fault or the servo driving the valve.
any views?
thx
the diverter valve between CH and HW appears to be playing up as the CH doesn't always fire up after HW has been used. Can anyone tell me how quickly the diverter should move please. When the HW is on it moves quickly with the pin moving out and pushing the microswitch(s) open. When it is switched off is moves back very slowly (a minute or more) before the microswitch connects again and the boiler fires up again.
I'm not sure if this is normal operation and if not whether it is the valve that is at fault or the servo driving the valve.
any views?
thx
