WANTED kane FGA

[justalex81]

As above. it will be a backup for when mine is away for calibration etc. As this is a backup i'm not looking for anything fancy, just the basic 250 will do.

If you've got one you're looking to sell let me know.

Thanks

 

[lame plumber]

if you send yours to kane its normally back in 3-4 days anyhow and getting a 250 calbrated can cost over £200 a go

 

[justalex81]

i usually have to wait at least a week to get mine back. why so expensive to calibrate a 250?!!!

 

[kay-jay]

I live about 3 miles from kane in atherton. Can drop off in morning and collect at noon. If they busy they will loan one over the counter. 🙂

 

[justalex81]

well aren't you a smug ****! lol

I looked into it. It's because the cell only lasts for 2 years in a 250, and the 455 has a 5 year cell.

 

[kirkgas]

Rather than but a second one that will also need to be calibrated why not borrow one from someone near you then you can lend them yours while theirs gets calibrated

 

[Dannypipe]

I might be selling my 455 as I will need a 457 soon. It's 4 years old, so will need a new sensor I think at next service/calibration. Had it serviced/calibrated with Kane every year. Got all the certs.

 

[Dannypipe]

Calibrated until Feb BTW. What's the going rate for one?

 

[smtplumbing]

If you send down to kane they are normally 2 day max they got mine on Wednesday and was back to me on Thursday. 100 sheets. I was going to buy one but what is the point I just never had anything gas wise for 2 days

 

[kozak1968]

Plumbase do a hire service for analysers. The rep called me once about it.