Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

View the thread, titled "What boiler" which is posted in Boiler Advice Forum on UK Plumbers Forums.

Status
Not open for further replies.

Roger Welton

Plumbers Arms member
Plumber
Gas Engineer
Went to size up for a job today, not sure what boiler to fit do you think a 24kW lpg combi will be sufficient, could fit a 4 pack outside.

ImageUploadedByTapatalk 21360262069.896365.jpg

ImageUploadedByTapatalk 21360262091.736727.jpg

Apparently was fitted in 1970, they are using circa £2k of oil a month at the moment!
 
Better use a 30kw just to be on the safe side.
Looks like painted asbestos lagging?
 
Yup, that is being removed in the next week or so by contractors along with the asbestos lagging on flues, was just on site with leccy today, getting him briefed to make the control panel. They are having the boilers replaced, and a low loss header fitted, this year and the pumps done next year.

Burners are putting over 110kW heat in each, though probably more like 70-80 out, as flue temps are up around 375deg Badged up as 'Allied Iron Foundries' and dated 1970, the customer has some great plans of the house and all the heating and hot water runs
 
Status
Not open for further replies.

Official Sponsors of Plumbers Talk

Reply to the thread, titled "What boiler" which is posted in Boiler Advice Forum on Plumbers Forums.

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.

Weekly or Monthly Email Digest

Back
Top