Where does the bellows fit on a Grohe adagio single valveflush?

[gordonbell20]

I can't see whether the bellows which activates the flush is supposed to fit inside the opening at the top of the valve or press down on the edge.
It doesn't seem to be aligned with the top so I don't know what's up with it.

 

[cjg]

View: https://www.youtube.com/watch?v=wwSRf_GF7Tc

hope that helps.

 

[gordonbell20]

Thank you. The problem is at the top of the valve . The actuation of the flush is by an air mechanism. Push the button and a pulse of air is pushed along a tube which connects to a plastic bellows. This bellows expands and pushes on the top of the valve moving the piston.
I can't see where the bellows connects with the top of the valve tube.

 

[Chuck]

The installation diagrams for the cistern show how the bits go together. Not sure which model you have but panel 4 on this set may give you the idea:

https://cdn.cloud.grohe.com/tpi/2000/2100/2190/2198/2198528/original/2198528.pdf

 

[Basher]

 

[gordonbell20]

The installation diagrams for the cistern show how the bits go together. Not sure which model you have but panel 4 on this set may give you the idea:

https://cdn.cloud.grohe.com/tpi/2000/2100/2190/2198/2198528/original/2198528.pdf

Yet it does, Thank you. It presses down on the edge. Thank you.

 

[LizDrysdale]

I can't see whether the bellows which activates the flush is supposed to fit inside the opening at the top of the valve or press down on the edge.
It doesn't seem to be aligned with the top so I don't know what's up with it.