Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
Latest activity
-
Admin replied to the thread Best Plumber Workwear Supplier | Workwear for Gas Fitters. -
-
Admin replied to the thread Hi another total amateur joining the forum.Hi and welcome. Sounds like you've got a project or two coming up then! Looking forward to seeing them progress.
-
Jjeff hammersley replied to the thread URGENT Has anyone ever fitted a Grohe auto-flush kit?.Amusingly, Grohe promotes that video as instruction for fitting the kit, despite the fact that the video doesn't show a w.c. pan at all and the procedure followed does not according with the Grohe documentation. You've hit the nail on...
-
ShaunCorbs replied to the thread Hi another total amateur joining the forum.Hello and welcome -
snowhead replied to the thread URGENT Has anyone ever fitted a Grohe auto-flush kit?.Never fitted one but,, It must be possible to fit it after the frame is tiled over otherwise it couldn't be repaired / maintained. It may need the wc pan to be removed. This video shows the autoflush kit being fitted, I'd say it can be... -
Jjeff hammersley posted the thread URGENT Has anyone ever fitted a Grohe auto-flush kit? in The Welcome Wagon :).We recently installed a Grohe Rapid SLX frame/cistern and connected it to a Grohe Sensia Arena wc/bidet. We found out too late (after everything was tiled in and operational) that the 'pre-flush' and 'auto-flush' functions rely on Grohe...
-
-
HHi I’m going to fit a 6 radiator CH system using 22mm JG speedfit and teeing off in 15mm to all rads, is it worth using the JG 4 port manifold ?has anybody used these before on CH system and are they reliable regarding leaks in years to...
-
Jjeff hammersley posted the thread Hi another total amateur joining the forum in The Welcome Wagon :).I am Jeff Hammersley, someone who has gotten through 68 years without learning anything about plumbing or heating work. Instead I spent my time as a 'professional button pusher' developing some of the largest databases in Europe...
-
Mmomckeown posted the thread Would you like to fit a radiator without PTFE tape in Central Heating Forum.Why in the 21st century are we still using an unknown number of turns of PTFE tape to seal the male threads on a radiator tail in the hope it won't leak. It's because radiator manufacturers haven't come up with anything new design wise...
-
RRBG reacted to ShaunCorbs's post in the thread Is it possible to fix a basin tap without turning the water off? with
Like.
Nope need new taps -
ShaunCorbs replied to the thread Is it possible to fix a basin tap without turning the water off?.Nope need new taps
-
NNeil23 posted the thread Is it possible to fix a basin tap without turning the water off? in DIY Plumbing Advice.Due to reasons I can't go in to - it is currently impossible to have the water turned off. The basin taps have basically stopped working on a downstairs bathroom basin - cold and hot - the taps don't turn smoothly - they have, over...
-
-
JJuileche replied to the thread pressure washer hose for drain clearing.I used a 15-metre hose with rear-facing jets and it worked well through a standard outside drain. Just took it slow and let the nozzle pull itself through.
-
Bbarryman replied to the thread Tap/shower diverter tap valve replace.Can anyone tell me what is description of the shower diverter in photo so I can look online?? A lot of these are described 3-way wherea my current one looks like it is a 2 way, in and out !!!! I don't mind if it's the lever kind as...
-
Ppfm401 posted the thread Hot and cold shower connections the wrong way round in Showers and Wetrooms Advice.What are your views on this? The issue is fixed but the contractor's attitude to it worries me for the rest of the job and using them in future. When my new shower was fitted it was either really hot or really cold, the issue was the...
We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.
