Questions and plumbing advice in the Plumbers Arms - For Professional Plumbers only, with 50+ posts..
Some popular plumbing forums: Plumbing Advice - Plumbing Tools - Plumbing Courses & NVQ's
Forum Prefix Filter
Not ones that go inside pocket trousers, but ones that are strapped round the legs. Price...
Pan connector going into....? Which is it joined onto? Does the pan con have fins or is it...
https://66.media.tumblr.com/ac82a4d3c2fac75e4a56071525f8faca/109c2d64aa11d35e-a7/s400x600/62c069b...
Made the mistake of agreeing to fit a 2nd hand cylinder for a family friend that is broke at the...
Want to change waste and change trap for plastic. If I can get a compression coupler over that...
Surveyed for a combi conversion and forgot to look at the make of Baxi boiler to be replaced...
Received these through the post today tail end of the crimbo give away . Cheers kop
I want one of these shirts. Would be good if you could get away with it. 😁😁
not been on here for ages amazing how many names i recognise hope your all well stay safe out there
Bit of an area of ignorance of mine (one of many 😑)
Customer has an odd set up where his...
First job after my week's holiday customer tried to tackle the strip out but needed a plumber in...
Well, it's been months of watching a football game with a can of beer and chucking half of it...
The type with a twistable control that mounts on the surface?
Can't find any googling around...
Installing a wash basin into a utility. Hot, cold and w/m stand pipe all there to adapt.
1...
I have an old Viner cast iron high level bell cistern, with a lead flush pipe. My customer wants...
Did anyone receive their advent prize from corgi direct? Still not received mine. 🤔
Thanking you kindly minimum word count blah blah
Why are there so many ads? I am finding it difficult to find the conversation within all the...
I use a thick foam kneeler but have started to notice worrying signs from my knees anyway...
Back to the swimming pool pipework. They're a bit like them crappy cheap self cutting valves but...
Any views on the Danfoss FP720
As Above would appreciate some input TIA
Customer of mine has cracked the corner of there acrylic bath its not chipped but there is a...
Customer has multi fuel stove doing heating and hot water.
Currently have an upstairs bathroom...
...................Thanks..............
Posts merging after 2hr between posts
No edit button
Am I missing something?
uou can’t get the trap out unless you remove the sump ?
Hi folks.
Where do you guys go to find a brick match please?
Should both immersions on a direct unvented cylinder have a timer?
Any suggestions for good...
10 rad system and 210l unvented with a 16kw coil
Do you size to cope with full heating load and...
Fitted this about 5 years ago and serviced each year this time found out the flue is leaking...
Standard CH white rad, flow and return connected at the top, bottom connections blanked...
Anyone know if you can buy these separately or what they're called or something similar...
Does the forum seem quiet in your opinion? I’m on another forum and there’s several plumbing...
If any of you knowledgable lot could offer me a bit of advice with the above that would be...
Anyone on here with their commercial gas tickets mind advising me on pricing. I have the...
Interest in recommendation for companies you've had to make claims through and claims have not...
- Question
Any advice appreciated, for a matching dab of paint for a new rad that I installed and...
Hi all,
As a few of you will know, I'm a bit rusty on the tools now and was wondering how to...
Has anyone fitted underfloor heating on an open vented system before? Any issues? TIA
My plumbase goodies turned up today thankyou to all responsible. Kop
Not my area of expertise but a good customer of mine has asked me to look at one of these. I...
After 17 years it's time for a new kitchen upgrade it's All delivered , made a bit of progress...
Heard someone recommend angle grind to channels the width you need then SDS with chisel bit to...
Would anyone have a good schematic drawing for a combi boiler with 2x 2 ports - rads and...
Hi folks, me again I'm afraid.
So after realising my flow temp on UFH is set to 62C made the...
Hi
What paperwork / test sheets do you guys issue when servicing unvented hot water cylinders...
Probably done about 5 small guttering/downpipe repairs in over a decade. Usually just work out...
Nice little project all first fixed huge open plan living area kitchen , utility room , double...
Evening chaps,
As above, I have just cut out sections in the past, however some just re-appear...
Do you fit them when fitting a combi?
What type?
Mechanical shock arrestor or mini expansion...
Newest Plumbing Threads
-
What's the most convenient way for me to plumb drainage channel?
- Started by Instadeth
- Replies: 1
-
-
Y Plan central heating gets hot on hot water demand
- Started by MPGASANDPLUMBING
- Replies: 1
-
Grant boiler rusting inside after 1 yr
- Started by RayPlumb
- Replies: 10
-
Instructions say to apply glass cement to rubber washer. Can I use silicone?
- Started by JM Tiling
- Replies: 2
-
How do I remove the copper pipe from the plastic connector?
- Started by JM Tiling
- Replies: 2
-
Pressure reducer/regulator for plastic water line?
- Started by carpetguardian
- Replies: 1