My house seems to be freezing and my double pvc glazing windows were installed over 20 years ago. The window seals have seen better days and there's gaps in between the window frames and window.
Not really done anything like this before as I am not a plumber or carpenter.
Does anyone which...
I know this is off topic.
However my car petrol door/ cover has come off. It needs gluing back on. I have tried gorilla epoxy glue. But it keeps falling off. It's plastic that I'm trying to glue.
Any help would be grateful.
Thanks
I'm looking for a shop/store to buy spare A/C parts in Lewisham. I'm looking for a compressor and electric board, if anyone knows of where to get them please let me know
Ive looked at the tech specs and it seems that the REMS has a lower flow rate but higher pressure at 5.5 bar. the Kamco has a higher flow rate so i understand that will be best for flushing a dirty system, however its maximum pressure of flow is under 2 bar. I wish to use a mashine for...
I recently moved into a flat with a Worcester Bosch CDi 35 Compact (or Classic System maybe?) and the thermostat on the boiler was broken (the thermostat was visibly damaged). I replaced it with a Drayton LP20RF receiver and thermostat. The boiler guy came round once other work was completed to...
Hi, the 15mm pipe work to my shower use compression fitting, the elbow joint which is in the wall and the pipe comes out and in to the shower is lose and water has been leaking in to the clinker wall. is there a deep socket size 24mm that i can use to retighten the compression nut ? as i can’t...
I bought a Hozelock tap to hose fitting, though it doesn't fit the tap.
The diameter appears to be 22mm.
I desperately need a fitting for a hose to water some plants, as running back and forth with a watering can seems so unnecessary.
Can anyone point me to what I'm looking for...
Dear all just bought this and tried to install yesterday.
Item is rubbish. Washer missing from bt which is needed to stop bolt turning. Other 3zwasher badly made and don't got bolt heads.
Spent ages making own new washer and hammering bits to fit washers.
In hindsight should have returned...
Does anyone out there have experience of a water CONDITIONER - I don't want a water softener installed and I wondered if these really work or just a gimmick?
I would appreciate any information/reviews from either owners or plumbers please.
Hi
Scenario,..... I go to install my new Washing machine and the little shut off valve has Seized solid and i can not access the mains water shut off valve,
In the past i would bend the fill pipe in half and put a jubilee clip on the bent section while im working on it.
Is there a specific...
Evening All,
I've just had a mare of a day digging up a kitchen floor trying to re-route pipes. Can anyone recommend some kind of pipe detector that will detect pipes in concrete?
Jock
My Superfire 2 is now leaking gas from the pressure relief hole ( just below the trigger).
It is 14 months old and looks like new. The previous one did exactly the same but i think I got about 3 years out of it.
I spoke to Rothenberger . They tell me they wont warranty their torches if you...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.