Search the forum,

Discuss Pressurised water system noise issues in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
2
hi
Have a pressurised water system in my house and when hot water taps turned on berynload groaning noise occurs, often but not every time . Pressure gauge reads ok, in that the two hands are at same reading although not sure what the reading should be. Any ideas how to resolve?
 
The groaning may well be the expansion of pipework when hot water is drawn through it. This occurs it pipework is tightly fitted within the property.
 
hi
Have a pressurised water system in my house and when hot water taps turned on berynload groaning noise occurs, often but not every time . Pressure gauge reads ok, in that the two hands are at same reading although not sure what the reading should be. Any ideas how to resolve?
Hi
This is a simple fix. But can only legally be done by someone who is G3 registered. Ask a local plumber if he is and if he has good experience with pressurised cylinders with external expansion vessels.
 
Double "agreement " with Chalked above , do not mess with it . Please don't asume all plumbers are G3 qualified . To save yourself a lot of time ask if they are G3 before you call them out . You can ask on here, plenty good trustworthy lads on here .
 
Status
Not open for further replies.

Reply to Pressurised water system noise issues in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
94
Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I have changed the 3 port actuator Honeywell head however this doesn’t seem to have solved the issue, does this mean that the programmer is faulty? Or is...
Replies
8
Views
238
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
281
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
316
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
402
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock