6mm Copper Elbow!!!

[moorem]

Does anyone know of where I can get some 6mm 90 degree copper elbows?
End /capillary are my preferred or even solder ring would do.
I've found some on EBay but the supplier wanted over £10 per piece!!!!
I need 10 of them for a project I'm working on.

Thanks for reading.

Martin

 

[Barry98]

Ac suppliers

 

[moorem]

You don't happen to have any names to hand do you?

Martin

 

[Barry98]

https://www.google.co.uk/search?q=a...iers+uk&ie=UTF-8&oe=UTF-8&hl=en&client=safari

 

[moorem]

Thanks.... I found loads of suppliers selling equipment but nobody selling 6mm copper elbows.

 

[Barry98]

B.e.s then

 

[smtplumbing]

is 6mm not commercial as i am sure my local chinese ask for them ages ago

 

[Barry98]

Air con

 

[Chalked]

Can't find any at b.e.s.

 

[Barry98]

Works for me

Plumbing Supplies | BES Gas & Plumbing Fittings

 

[PlumbBobBob]

and me too £6.10 each

 

[Plumbstar Tom]

 

[kay-jay]

and me too £6.10 each

Ouch

 

[moorem]

Aha! Found some 1/4" elbows on Ebay. £7 for 10 units all the way from China with postage included - so I bought 40 of the things. I can afford to wait. Past experience has proven that deliveries from China have been faster than from the USA which was another source but more expensive.
I found one supplier on EBay selling them at nearly £14 a unit so £6.10 per unit would seem cheap!
Not 6mm but I can cope with the 0.014" (14 thou) difference in diameter.

Thanks very much to everyone for your time and comments.

Regards

Martin

 

[AWheating]

what they for? prob wont meet any bs/en standards.