S
slurm
Hi All,
I am hoping someone can help me with a small issue.
We have decided that our 2 toilets have reached the end of their lifetime and are going to be replaced.
After visiting the local DIY shops we have discovered that our toilets which have separate cistern and pans can only be replaced by close coupled units. Ok i thought until i measured up and found that our pans are far further away from the wall than the newer coupled units allow.
Our waste stack is internal of our house (single stack) and the waste pipe comes out of the side wall and turns 90 degrees into a P shape trap, this doesnt seem to allow much "give" in the distance and if i install a close coupled toilet i would have a gap at the back of the toilet and wall.
Yes i spose i could add a false wall type thing, but i would prefer to see what the professionals do to get round this issue.
Thanks in advance for any replies...
I am hoping someone can help me with a small issue.
We have decided that our 2 toilets have reached the end of their lifetime and are going to be replaced.
After visiting the local DIY shops we have discovered that our toilets which have separate cistern and pans can only be replaced by close coupled units. Ok i thought until i measured up and found that our pans are far further away from the wall than the newer coupled units allow.
Our waste stack is internal of our house (single stack) and the waste pipe comes out of the side wall and turns 90 degrees into a P shape trap, this doesnt seem to allow much "give" in the distance and if i install a close coupled toilet i would have a gap at the back of the toilet and wall.
Yes i spose i could add a false wall type thing, but i would prefer to see what the professionals do to get round this issue.
Thanks in advance for any replies...