Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss Bargain lead free solder in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
It sounds like scouring eBay for bargains is your new hobby.

;-)
 
The link Alex (Destroyer) gave was brilliant. Over £250 worth of Mcalpine traps, fittings, pan connectors and odds and ends for 60 quid. I don't trawl on there guys but when I need to restock the van I go and have a butchers as it's a hell of a lot cheaper than PTS!

Still got a box of pop up pencils to get rid of.......
 
Last edited by a moderator:
So it does Martin! It's still cheap though as Plumbfix are selling it for £21.95 for one roll. I have used the local scrappies too, but need new solder and don't have the time to go through there.
 
So it does Martin! It's still cheap though as Plumbfix are selling it for £21.95 for one roll. I have used the local scrappies too, but need new solder and don't have the time to go through there.
its not cheap colin i am paying a tenner in plumbbase thats inc vat
 
It doesn't seem that cheap to me either. I think I pay about 14ish anyway for the 500g one. Certainly not paying £10 though, that is a bargain gasman.
 
It doesn't seem that cheap to me either. I think I pay about 14ish anyway for the 500g one. Certainly not paying £10 though, that is a bargain gasman.
something to do with terms set up,not all branches are the same
 
I try to use leaded where possible. Better in every respect other than being toxic. Don't understand people who throw their money away using lead free on non potable/gas.

£4 is good Tamz, where's that? Need to check my prices on this actually, no idea what I'm paying ATM.
 
i pay about a tenner for it as well, i know loads of guys who use leaded as they say whens last time your water was tested ???
I never understand tho the terms i get some things i get good deals and others just seem rubbish its like they make it up as they go along
 
I try to use leaded where possible. Better in every respect other than being toxic. Don't understand people who throw their money away using lead free on non potable/gas.

£4 is good Tamz, where's that? Need to check my prices on this actually, no idea what I'm paying ATM.

Last time was from BES but PTS are the same if i buy them 20 at a time.

Leaded is only used on heating and gas.
 
I paid £16 for lead free solder and a large tub of laco from ebay just keep trawling for bargains mate
 
Status
Not open for further replies.

Reply to Bargain lead free solder in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Replies
2
Views
217
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new...
Replies
1
Views
263
B
    • Friendly
Hi, I've followed this excellent forum for several years but have never posted, so decided I'd better give some details. My status is the upper...
Replies
2
Views
230
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to...
Replies
9
Views
317
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
Replies
2
Views
216
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock