Discuss Bargain lead free solder in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
G

Guest123

I've just bought a 500g of lead free solder for £13.99 on ebay. I'll let you all know how good it is.

If anyone wants the link to try it for themselves here it is:
4Trade Lead Free Solder Wire 500g | eBay
 
Last edited by a moderator:
It sounds like scouring eBay for bargains is your new hobby.

;-)
 
The link Alex (Destroyer) gave was brilliant. Over £250 worth of Mcalpine traps, fittings, pan connectors and odds and ends for 60 quid. I don't trawl on there guys but when I need to restock the van I go and have a butchers as it's a hell of a lot cheaper than PTS!

Still got a box of pop up pencils to get rid of.......
 
Last edited by a moderator:
So it does Martin! It's still cheap though as Plumbfix are selling it for £21.95 for one roll. I have used the local scrappies too, but need new solder and don't have the time to go through there.
 
So it does Martin! It's still cheap though as Plumbfix are selling it for £21.95 for one roll. I have used the local scrappies too, but need new solder and don't have the time to go through there.
its not cheap colin i am paying a tenner in plumbbase thats inc vat
 
It doesn't seem that cheap to me either. I think I pay about 14ish anyway for the 500g one. Certainly not paying £10 though, that is a bargain gasman.
 
It doesn't seem that cheap to me either. I think I pay about 14ish anyway for the 500g one. Certainly not paying £10 though, that is a bargain gasman.
something to do with terms set up,not all branches are the same
 
I try to use leaded where possible. Better in every respect other than being toxic. Don't understand people who throw their money away using lead free on non potable/gas.

£4 is good Tamz, where's that? Need to check my prices on this actually, no idea what I'm paying ATM.
 
i pay about a tenner for it as well, i know loads of guys who use leaded as they say whens last time your water was tested ???
I never understand tho the terms i get some things i get good deals and others just seem rubbish its like they make it up as they go along
 
I try to use leaded where possible. Better in every respect other than being toxic. Don't understand people who throw their money away using lead free on non potable/gas.

£4 is good Tamz, where's that? Need to check my prices on this actually, no idea what I'm paying ATM.

Last time was from BES but PTS are the same if i buy them 20 at a time.

Leaded is only used on heating and gas.
 
I paid £16 for lead free solder and a large tub of laco from ebay just keep trawling for bargains mate
 
Status
Not open for further replies.

Reply to Bargain lead free solder in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi All, I hope you are doing well. I have this 3.25mm lead-free grade 99c solder wire. I know that the good practice to bend the wire before...
Replies
7
Views
970
Hi, Short version: I have about 4" of pipe sticking out of a concrete floor in a cupboard. It makes a 45-degree bend as it exists (bent, not with...
Replies
14
Views
1K
Hi guys. I've been running an UFH installation/ repair business for 7 years now and one of my main frustrations is finding the parts for the UFH...
Replies
1
Views
230
Just an update to anyone who was following the thread on this site: Tify to gas engineer, what will it take? I got a DM from a user asking for an...
Replies
2
Views
486
Hi all, Excuse the length but this seems like a complicated fix. I lived in a 1930s block of flats. Brick building with concrete slab floors...
Replies
7
Views
2K
Back
Top