Search the forum,

Discuss Boiler for your own house in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

Scott_D

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
6,131
What would you fit in your own house?
To keep it a fair comparison it must be a combi and around 30kw
 
Vaillant. There's one about 10ft from me. Never been Touched in 8 years.
The last house I had had an vaillant fitted in 1996. I serviced it when I sold the house in 2009. ,
 
Viessman or Worcester
 
Baxi duo tec 28 he been in 10 years had a board less than ÂŁ100 spark electrode and rectification probe thats it would have another one tomorrow no plastic in here cheers kop

20170317_143316.jpg
 
Last edited:
No not had a Vessel guys , the one in the picture is a 6 year old one i put in serviced it recently vertical flued and in a cupboard like new as you say .
Cheers kop
 
Have put Viessmann combi in mine 2 weeks ago
 
I only fit Viessmann so am bit biased but I've had very few issues & the issues I have had have been sorted without any hassle, so for me it was no brainer.
 
Baxi solo 2 still going strong......if a bit like Triggers broom.....
 
Last edited:

 
Either an Ideal Vogue Combi or an Intergas for me. I like them both. Definitely not a Worcester or Vaillant for me, hate working on both.
 
Status
Not open for further replies.

Reply to Boiler for your own house in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
219
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about this one. Granddaughter just moved house and this valve decided to leak when it was closed. When open its fine. Normally I have repacked the gland on...
Replies
7
Views
178
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
1
Views
112
Recently had a Viessmann Vitodens combi boiler installed, quite often when the adjacent cold mixer tap is opened the boiler starts for a few seconds! Can anyone tell me what is causing this? And how to cure?
Replies
3
Views
195
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
241
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock