Search the forum,

Discuss Boiler for your own house in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

Scott_D

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
6,131
What would you fit in your own house?
To keep it a fair comparison it must be a combi and around 30kw
 
Vaillant. There's one about 10ft from me. Never been Touched in 8 years.
The last house I had had an vaillant fitted in 1996. I serviced it when I sold the house in 2009. ,
 
Viessman or Worcester
 
Baxi duo tec 28 he been in 10 years had a board less than ÂŁ100 spark electrode and rectification probe thats it would have another one tomorrow no plastic in here cheers kop

20170317_143316.jpg
 
Last edited:
No not had a Vessel guys , the one in the picture is a 6 year old one i put in serviced it recently vertical flued and in a cupboard like new as you say .
Cheers kop
 
Have put Viessmann combi in mine 2 weeks ago
 
I only fit Viessmann so am bit biased but I've had very few issues & the issues I have had have been sorted without any hassle, so for me it was no brainer.
 
Baxi solo 2 still going strong......if a bit like Triggers broom.....
 
Last edited:

 
Either an Ideal Vogue Combi or an Intergas for me. I like them both. Definitely not a Worcester or Vaillant for me, hate working on both.
 
Status
Not open for further replies.

Reply to Boiler for your own house in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer...
Replies
4
Views
277
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about...
Replies
7
Views
239
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up...
Replies
2
Views
250
PSxxxxxx
P
Recently had a Viessmann Vitodens combi boiler installed, quite often when the adjacent cold mixer tap is opened the boiler starts for a few...
Replies
3
Views
225
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the...
Replies
5
Views
307
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock