Discuss Boiler issues not firing after refill in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Valve and pump arrangement
 

Attachments

  • 20230316_172407.jpg
    20230316_172407.jpg
    553.8 KB · Views: 14
Right so its not open vented.

Typically sealed systems are incredibly easy to get air locks out of.

Just to be sure, that's an old photo right? As your pump and valves aren't wired in.

Need a photo above the boiler of pipework arrangement too and one inside to tell you where to vent the heat exchanger, surprised though with a sealed system the pump won't clear that.

Check what speed your pump is set too and then turn it down to 1 which is the slowest, this may help prevent cavitation until the air clears
 
Right so its not open vented.

Typically sealed systems are incredibly easy to get air locks out of.

Just to be sure, that's an old photo right? As your pump and valves aren't wired in.

Need a photo above the boiler of pipework arrangement too and one inside to tell you where to vent the heat exchanger, surprised though with a sealed system the pump won't clear that.

Check what speed your pump is set too and then turn it down to 1 which is the slowest, this may help prevent cavitation until the air clears
 

Attachments

  • 20230325_171104.jpg
    20230325_171104.jpg
    429.9 KB · Views: 10
Try this. No guarantee that it will work but you have few options. Completely lose the bottom pump valve. Slowly loosen the top pump valve's compression nut, water / air will bleed out and may be enough to release the air lock.
 
Close all but one rad closest to the boiler upstairs turn ch on and ramp the pump upto 3 if it’s not already on it and let it run
 

Reply to Boiler issues not firing after refill in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Similar plumbing topics

when I removed the back coal saver I can now see the mental back boiler. I could not see the back boiler when I put the coal saver in place last...
Replies
0
Views
479
Hi, I have a Vailant EcoTec Boiler with a Megaflo. These are controlled by a Honeywell controller. I have one 3 port diverter, where one of the...
Replies
5
Views
277
So a strange conundrum regarding water temp if anyone can help resolve, would be much appreciated. Ive tried to give as much info as possible to...
Replies
1
Views
186
J
Hi all, I am a plumber but I do not carry out works to boilers as the majority of my is bathrooms so I am not gas safe. I have completed a...
Replies
1
Views
515
Hi, Just had a "Main Eco Compact" combi boiler installed as the Biasi one failed. It seems to work fine, gives a hot bath, i dont ever use the...
Replies
2
Views
448

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock