Boiler Weight - DUMB question alert!!!!

[jaydebruyne]

I'm no weakling by all means, but I'm no he-man either. I've started training to build up my strength again (used to train quite a lot a few years ago) to make my life easier when I start fitting boilers for my firm when I get gas safe.

I was reading through some boiler manuals (this is for a Greenstar 24I/28I Junior) and came across a 'lift weight' - see pic below:



is this literally the weight of the boiler you'll lift, without the jig of course?? And if I am having a blonde moment, what does it mean?

 

[Masood]

Not sure what you mean, "what does it mean"?? It's the weight of the empty boiler, without jig or cover. The dead weight that you have to lift onto the bracket / jig.

I don't fit W-B but that seems like a massive difference between the boiler weight and lift weight...

 

[snowhead]

Yes
Lift weight will be the minimum weight you can get the boiler down to.
No case, no jig, no packaging materials. (could be lightened by removing fan, pump and control section)

Packaged boiler weight is what it weighs when sent from the manufacturer.

 

[Alex Knight]

Most new boilers aren't much of a struggle to lift about, some are but usually because of being fitted in awkward spaces rather than weight.

What you should be training for is removing some old boilers which weigh a ton! They can take you by surprise sometimes

 

[jaydebruyne]

I don't fit W-B but that seems like a massive difference between the boiler weight and lift weight...

That's what I thought.. Hence the *dumb* question in case I was wrong. I didn't think the jig weighed 12kg.. Obv it does! Cheers Masood

 

[jaydebruyne]

Yes
Lift weight will be the minimum weight you can get the boiler down to.
No case, no jig, no packaging materials. (could be lightened by removing fan, pump and control section)

Packaged boiler weight is what it weighs when sent from the manufacturer.

At 27kg I won't need to strip anything from it.. It's not too heavy to lift. Cheers snowhead

 

[jaydebruyne]

Most new boilers aren't much of a struggle to lift about, some are but usually because of being fitted in awkward spaces rather than weight.

What you should be training for is removing some old boilers which weigh a ton! They can take you by surprise sometimes

Tell me about it, I went to fit a new vessel on a Vaillaint turbomax plus 828e that was fitted inside a cabinet with a finger width room around the sides - luckily I fitted an external vessel in the end!

 

[ShaunCorbs]

all i have to say is glow worm ultra com 35 store

67kg empty and thats a domestic combi nearly killed me putting it high and on

 

[Masood]

That's what I thought.. Hence the *dumb* question in case I was wrong. I didn't think the jig weighed 12kg.. Obv it does! Cheers Masood

I'm really not sure it can be 12Kg mate? Intergas jigs have the expansion vessel on them and they aren't that heavy!

 

[AWheating]

its not the weight of the new boiler you want to worry about, its the weight of the old one you have to pull off the wall.

if your working for a company then your entitled to expect a 2 man lift, dont be a he man, he man cant pay his bills lying in bed with a bad back or hernia.

 

[jaydebruyne]

all i have to say is glow worm ultra com 35 store

67kg empty and thats a domestic combi nearly killed me putting it high and on

Whoa! Ok, that's effing heavy!!!

 

[jaydebruyne]

its not the weight of the new boiler you want to worry about, its the weight of the old one you have to pull off the wall.

if your working for a company then your entitled to expect a 2 man lift, dont be a he man, he man cant pay his bills lying in bed with a bad back or hernia.

Not an option - depending on location of the installation. If it's going up where ladder access is required (i.e. loft), than yes 2 men as I've assisted on those types of jobs. But if it's going in a kitchen or something we're on our own.

At the moment I'm comfortable with say 35-40kg by myself, anything more it's a struggle and certainly not 67kg like Shaun!!! I would definitely be calling for help

 

[AWheating]

Not an option - depending on location of the installation. If it's going up where ladder access is required (i.e. loft), than yes 2 men as I've assisted on those types of jobs. But if it's going in a kitchen or something we're on our own.

At the moment I'm comfortable with say 35-40kg by myself, anything more it's a struggle and certainly not 67kg like Shaun!!! I would definitely be calling for help

do you get sick pay?

Your company will have a risk assessment and method statement about fitting the boiler. follow it and your covered. I bet it says 2 man lift? if only one man can fit in the space then mechanical lift device etc......

in the real world we just bang it on the wall however, its only when your injured and off work you start to take notice of these things.

the weight is not really what will get you its the method of lifting and shape of the weight. I used to dumbell bench press with 50kg dumbells without any bother but i hurt my back poorly lifting the dumbells out the weights rack.

 

[jaydebruyne]

do you get sick pay?

the weight is not really what will get you its the method of lifting and shape of the weight. I used to dumbell bench press with 50kg dumbells without any bother but i hurt my back poorly lifting the dumbells out the weights rack.

Sick pay? Nope!

Yeah I hear you re: method of lifting and shape of weight. 50kg dumbbell benches..?!?!? I need to start training harder haha that's pretty intense man.. So you basically benched with a boiler in each hand... Lol

 

[AWheating]

Sick pay? Nope!

Yeah I hear you re: method of lifting and shape of weight. 50kg dumbbell benches..?!?!? I need to start training harder haha that's pretty intense man.. So you basically benched with a boiler in each hand... Lol

50kg was the max dumbell at the gym at the time. id probably only do half that now as i aye trained for about 10 years and im a fat feka with a repaired hernia in the back of my mind.