D
Dannyparty92
Very useful things!
Discuss Brass fittings in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Cheers mateUse an empty inhibitor bottle, lay it on its side and cut a section out of it to catch water in.
I need to remove my rad from my bedroom because some numpty that lived in the house before us stood on the radiator while throwing things out of the window and pulled a rad bracket out of the wall.The problem is i have a low lying window ledge and the radiator sits low to the floor so i think getting a bucket in there will be near impossible lol
Thats what your thumbs are for. Close the valves put a couple of rags under the ends, split the nuts and lift it out full of water.
Never had the need for a wet vac in my life and i doubt if i ever will.
Reply to Brass fittings in the Plumbing Jobs | The Job-board area at PlumbersForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.