Search the forum,

british gas es1 thermostat problem

Post new thread

Discuss british gas es1 thermostat problem in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
P

Patch58

Messages
8
Can anyone help with the following problem…

I have a British Gas ES1 The LED on the thermostat is lit and it turns on the boiler but the dial does not click and does regulate the temperature.

There is a label on the thermostat that essentially says if the unit is not powered it will not regulate the heat and the thermostat will not click, but to my novice eye the thing looks powered :confused5:







​
 
Check it for batteries, if it has batteries change them
 
Sorry Joe, we don't know what boiler he has.
 
Last edited by a moderator:
Status
Not open for further replies.

Reply to british gas es1 thermostat problem in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

F
What constitutes a Commercial Appliance and thus a Commercial Kitchen?
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
501
FozzieBear
F
A
Emergency Stop Buttons in Boiler Rooms
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
291
oz-plumber
O
T
Trying to source a dual-flush valve
Does anyone know where I can get one of these? Toilet is leaking into the bowl. This one pushes in with a half turn but I can't find one anywhere.
Replies
2
Views
213
Thomas J Marshall
T
F
  • Question
No Hot water, Fixed and Broken Again Ideal Logic 24
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
160
Lou
Lou
B
POTTERTON PROMAX 28 COMBI Boiler - Hot Water Issue
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
264
oz-plumber
O
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Tile Forum
TilersForums.co.uk
Tiling Standards BS5389
Tiling News
Tiling Blog
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock