Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss British gas in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

Raj

Messages
27
Hi guys

I applied for the apprentice gas installation engineer role with British gas and I've been invited to the final stage of the recruitment process. There will be a practical assessment, interview and role play. Any advise for the day will be highly appreciated especially on the practical assessment and role play.

Thanks

Raj
 
take a complete lingerie set (stockings basque etc) along for the role play, one of you has to be a housewife! :)
 
quite the opposite old chap! my work is in Richmond Esher Claygate and Cobham don't you know what what
 
if you dont know the answer to any question they will except............. "the system needs powerflushing"
 
Hi Raj

lots of the below is just banter on here I will
give you my take on British Gas - and truthfully
how you might approach you interview

I have a number of friends in Low Places at BG

1. You will need to assure them you will a company man
and do all they ask and if you are young this is ok
for a few years - you will get a van, great training
plenty of support -( if you make friends in Bg)
2. Be aware this company are totally sales orientated
and will want you to be a successfull salesman when
you are in the customers house
3. They like you to be accurate and produce a profit

4. Some fitters find this all too much and leave

5. On balance I would yes go for it bend over 4
a few years and then go on your own

but remember they want sales fitters 1st and ordinary fitters last

centralheatking
bnds

Hi guys

I applied for the apprentice gas installation engineer role with British gas and I've been invited to the final stage of the recruitment process. There will be a practical assessment, interview and role play. Any advise for the day will be highly appreciated especially on the practical assessment and role play.

Thanks

Raj
 
Last edited by a moderator:
Hi Raj

lots of the below is just banter on here I will
give you my take on British Gas - and truthfully
how you might approach you interview

I have a number of friends in Low Places at BG

1. You will need to assure them you will a company man
and do all they ask and if you are young this is ok
for a few years - you will get a van, great training
plenty of support -( if you make friends in Bg)
2. Be aware this company are totally sales orientated
and will want you to be a successfull salesman when
you are in the customers house
3. They like you to be accurate and produce a profit

4. Some fitters find this all too much and leave

5. On balance I would yes go for it bend over 4
a few years and then go on your own

but remember they want sales fitters 1st and ordinary fitters last

centralheatking
bndsQUOTE=Raj;646381]Hi guys

I applied for the apprentice gas installation engineer role with British gas and I've been invited to the final stage of the recruitment process. There will be a practical assessment, interview and role play. Any advise for the day will be highly appreciated especially on the practical assessment and role play.

Thanks

Raj
[/QUOTE]

Thanks centralheatingking and I appreciate your advise. Good news is that they've offered me the apprenticeship and I've accepted. Do you know anything about the duke of Edinburgh award or the British gas award. Is it compulsory that I do the award?

Thanks
 
Great news that fella. Always nice to hear a success story and to be honest as much as we slate them there can't be many better ways into the industry.
 
good advice from chk may be worth you talking to villa tom or doodlebug both work for BG and both are members on here
 
Status
Not open for further replies.

Reply to British gas in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

My son has an apprenticeship interview for to become a plumber and heating engineer. The have said there will be a multiple choice exam for this...
Replies
3
Views
473
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is...
Replies
5
Views
543
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the...
Replies
5
Views
315
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't...
Replies
6
Views
346
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Replies
2
Views
212
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock