Search the forum,

Can't edit????

Post new thread

Discuss Can't edit???? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
B

Blake

Plumbers Arms member
Plumber
Gas Engineer
Messages
1,064
Does anyone else have problems trying to edit posts:confused::confused: Sometimes the edit option does not appear, am I missing something:confused::confused:
 
no happened to me earlier regarding my web posting , couldn't do out about it
 
I have spoken to the admin about this, they have asked if anyone else has been having the same problem but they couldnt figure out what it was
 
Status
Not open for further replies.

Reply to Can't edit???? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

T
Trying to source a dual-flush valve
Does anyone know where I can get one of these? Toilet is leaking into the bowl. This one pushes in with a half turn but I can't find one anywhere.
Replies
2
Views
223
Thomas J Marshall
T
C
Y Plan, no hot water but heating is working when called
Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I have changed the 3 port actuator Honeywell head however this doesn’t seem to have solved the issue, does this mean that the programmer is faulty? Or is...
Replies
8
Views
350
John.g
J
C
Mixer bar fitting solutions?
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
236
SimonG
SimonG
B
POTTERTON PROMAX 28 COMBI Boiler - Hot Water Issue
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
275
oz-plumber
O
M
Central heating losing pressure all the time
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
2
Views
247
PSxxxxxx
P
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Plumbers' Talk
Plumbers Forum - Plumbing Advice
Electricians Talk
Tiling Advice
UK Tiling Forum
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock