Discuss Cant gas rate new boiler in the Gas Engineers Forum area at PlumbersForums.net

Messages
37
Just fitted a new boiler for customer have gone to gas rate when commissioning and batteries are dead in gas meter. Gas supplier won’t come out until 6th Jan. Does anyone have any ideas what I can do? Customer obviously needs heating and hot water over Christmas
 
Gas inlet to boiler to confirm ok you can either do gas rate or inlet pressure
 
What was wrong with mechanical meters eh?
Same old story, high tech flashy fancy gear breaks down, you're goosed.
What? Don't tell me you don't enjoy trying to figure out how to operate a new gas meter? I love trying to download manual etc and then give up and find a YouTube video!
 
What? Don't tell me you don't enjoy trying to figure out how to operate a new gas meter? I love trying to download manual etc and then give up and find a YouTube video!
OOOO Yeah! Spend 10 minutes squinting at a phone screen and find what you want, then read all about it by brushing your fingers up and down it, try to enlarge it and then proceed to the meter only to have to fiddle with buttons a 2 year old couldn't get their fingers onto without pressing 5 at once, just to see it go off before you've done what you wanted to.
To add to that, because it is digital and we need a 2 min gas rate time, the boiler gets to temp and stops before you're done. Proper improvement if you ask me.
Back in the day:
Red test dial, a clock, no instruction needed, 1 minute test. I can see why they got rid of it..........Boring!
 

Reply to Cant gas rate new boiler in the Gas Engineers Forum area at PlumbersForums.net

Similar plumbing topics

We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is...
Replies
5
Views
554
  • Article
A Plumber Who Worked Illegally Gets A Suspended Sentence After Falsely Claiming To Be Gas Safe Registered. A Plumber in Herefordshire was...
Replies
0
Views
246
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the...
Replies
5
Views
323
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to...
Replies
9
Views
320
Hi, I have a Worcester 28i junior boiler that has started to lose pressure, only when using the central heating. When using hot water I have no...
Replies
6
Views
264

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock