ceramic sink?

[justlead1]

Hi Theres a fellow on here advertises his wares, some thig like "365 drill"
Good luck

 

[unguided1]

Hi Billybongo
just to let all know the reason why I start with an 8mm hole is because I once gave a sink a severe clout to get it started and the enamel went where I didnt want it to, I also leave the 18lb sledgehammer in the unguided missile so I dont get too excited.
regards
Mike
PS
for those of you who still have the old rawl plug mason master heres another use for it, go on you dont need a special drill, just clout it.

 

[billybongo]

Hi Mike, the reason i used 8mm was because it seemed the safest choice the first time round and also aloud for the file to go through , and the main reason was the sink was somewhere around £300 ,like playing with a bomb i thought , cheers mark

 

[dave1]

thanks for all of your great advice, ill let you know the out come when i eventually get round to doing it.

 

[Carl86]

Id check out 365 Drills sounds like it could do just that job.

[DLMURL="http://www.ukplumbersforums.co.uk/redirector.php?url=http%3A%2F%2Fwww.*********.com%2F"]Tile drills bits porcelain wall 365 drills diamond holesaws[/DLMURL]

 

[365drills]

[video=youtube;PpZVa5I0blA]http://www.youtube.com/watch?v=PpZVa5I0blA[/video]


http://*********.com/jpgs/hole3.jpg

The diamond core tile drills at 365-Drills are perfect to cut into sinks, ceramic sinks, toilets, waste pans,

You can open up a 30mm hole (normal tap) to a 35mm hole (mixer tap)

Add LED lights

Add after market pure water taps

New holes or existing holes. Makes no odds

http://*********.com/jpgs/hole4.jpg

Perfect holes drilled into ceramic sinks etc with PORSADRILL from 365-drills

 

[365drills]

[video=youtube;WSMig1vWc8g]http://www.youtube.com/watch?v=WSMig1vWc8g&feature=player_embedded[/video]

 

[turnpin]

[video=youtube;WSMig1vWc8g]http://www.youtube.com/watch?v=WSMig1vWc8g&feature=player_embedded[/video]

Amazing display Richard will see if I can persuade someone to put on their Christmas list for Me ....oh and when are the steel toe capped socks being released?...regards turnpin:rofl:

 

[Guest123]

A sharp pointed chisel as per the manufacturers instructions.

 

[PlumbBobBob]

i've acquired a small cold chisel just for this purpose although the first time i did it was really nerve-racking to say the least lol