Discuss ContractorForum: getting out working: as most of you know im a new tiler, what is the in the Plumbing Jobs | The Job-board area at PlumbersForums.net
- Status
-
Not open for further replies.
Administrator
Staff member
Admin
- Status
-
Not open for further replies.
Reply to ContractorForum: getting out working: as most of you know im a new tiler, what is the in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Hi,
I have an old steel water mains pipe (approx 45mm) that I need to connect to a new pehd water mains (25mm). I can't get at it to create a new...
Hi all
Noticed bad smell in my drain out side put my hand down and it unclogged it for now however I checked my sewer drain and after flushing my...
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16...
Hi. I need a new toilet supply line but don’t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic...