Search the forum,

Does this type of 10mm push fit come apart?

Post new thread

Discuss Does this type of 10mm push fit come apart? in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

ian.

ian.

Messages
57
Home central heating in 10mm plastic then via a push fit connector to 10mm copper feeding the radiator.

Is it possible to get the copper pipe out of the fitting or is the coupling a one time use design.
 

Attachments

  • 8814F88C-EF55-4DB0-B1AA-F11AA6C29935.jpeg
    8814F88C-EF55-4DB0-B1AA-F11AA6C29935.jpeg
    292.3 KB · Views: 17
Yes the white collars should pop down and a normal grab ring you should see there caps to save anything touching the grab ring
 

Reply to Does this type of 10mm push fit come apart? in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Similar plumbing topics

T
22mm MDPE connection
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it 😬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
277
ShaunCorbs
ShaunCorbs
dreikher
Hole in copper pipe, solder under floor, T coupling & protection
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
200
dreikher
dreikher
S
Using coil to clear pipe leading to gutter
Hi, I seemed to have a blockage in kitchen sink. A plumber came and cleared all the pipework that is visible inside my home (there was debris and pebbles!) We saw that the pipe that takes water down the gutter was visibly full to the top. He said he will return with a coil to push through...
Replies
2
Views
106
Sonya K
S
A
copper vs pushfit pipes
Copper pipes, I think its fair to say, is not what it used to be, the copper is getting thin while the cost is going up. Meanwhile, plastic Pushfit seems to be getting better and better, cost and convenience was always better, but now the quality is to, have we reached a stage where plastic will...
Replies
2
Views
267
Chuck
C
W
Outdoor Tap at Porch
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
245
Dave Moore
D
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Tiling Advice
Contractor Advice Forum
UK Tiling Forums
Tiling Forums UK
BS 5389 Tiling Standards
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock