Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss Dual flush valve for 2" flush pipe? in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Messages
3
Any recommendations for a push-button toilet dual flush valve, please (and must have a cable over 310mm)? Tried a Fluidmaster model but plumber says it won't fit the 2" flush pipe. Thanks.
 
Change the flush pipe to 11/2 / standard ?
 

Reply to Dual flush valve for 2" flush pipe? in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Replies
2
Views
212
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about...
Replies
7
Views
254
I have a plumber coming tomorrow to change a cartridge on a badly dripping tap on my bathroom mixer unit. There is no separate isolating valve for...
Replies
1
Views
300
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16...
Replies
0
Views
232
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't...
Replies
6
Views
346
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock