Discuss exposed shower valves... in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

mutley racers

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
5,171
With 150 centres. Any recommendations. Not really over 200 bucks. Have 150 centres and are not bar valves. Mira or Bristan I guess
 
When it says the inlets can b 110mm to 155, is it due to off set connectors? Or can you move the inlet connections inside the valve and connect compression?
 
What make showers do you all recommend normally to customers normally? Do you have a set thermostatic mixer/electric/pumped shower you always use?
I've been looking at some of the aqualisa stuff but it's gets pretty expensive.
 
Status
Not open for further replies.

Reply to exposed shower valves... in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock